Acceed to main content

Contents

Tanks and storage

Vertical tanks

    • Vertical tanks 0
    • Vertical tanks 1
    • Vertical tanks 2
    • Vertical tanks 3
    • Vertical tanks 4
    • Vertical tanks 5
Scroll left
Scroll right

We manufacture a wide range of vertical tanks in exact accordance with your specifications.

The compatibility study that we do to enables us to define the optimum type of anti-corrosion; specifically, thermoplastic or resin-enriched liner.

The definition of the structure itself will be obtained by performing the necessary calculations, as per your specifications or as per the French NF EN 13121 standard.

If you so require, this can be amended to comply with book n° 7 of the UIC (French Chemical Industries Federation).

Each device can be finished off with an attractive topcoat in a color chosen by you, or colorless including containing a top-notch anti-UV system.

The mechanical characteristics and the properties of the polyester are such that we can manufacture products able to cope with temperatures from -40 C° to +110 C°, as given in your specifications.

If such is required by your process, we can make your devices able to cope with pressures from absolute vacuum to 8 bars, in keeping with the directive for PED equipment.

Each vertical tank can be fitted with the following, if you so request:

  • A polyester handrail, in galvanized steel, or in aluminum, with anti-slip system
  • A vertical agitator support with counter-blade, or side agitation
  • A safety bow or walkway to connect several devices
  • Bubble booms, immersion pipes, interior or exterior supports to hold your piping

Your tank can have a rounded or conic bottom, with a skirt or standing on legs, with an open top, or a flat, rounded or conic roof. It can be insulated and fitted with a top-quality temperature control unit.

The tanks we build for you can have a complete emptying system, either using a flat bottom gate system, or using a sloping bottom system, which can be compensated or not, depending on your solid polyester.

Our design bureau will carry out the calculations to determine snow and wind resistance, using the NV 65 and Eurocode 1 standards for perfect anchoring.

These calculations can be developed to determine earthquake-resistance requirements, should this be necessary. In any case, CITP has the necessary tools to prepare a simulation.

Our logistics service can handle all requests regarding transport, unloading, installation and assembly of your peripheral devices.

All our products are manufactured subsequent to in-depth studies. Moreover, no manufacturing work starts unless and until you, the ordering customer, you have approved the manufacturing plans. Specifically, this means that you will receive a manufacturer dossier, whose content will have been clearly formalized beforehand. Our commercial engineers and personnel are at your disposal to guarantee optimal matching between your requirements and our equipment, making sure that you are specific requirements can be met.

The services of a real partner

For all of its activities, CITP makes:

  • The compatibility study
  • The study of equipment
  • The calculation notes
  • The different controls previously defined
  • The folder

We produce for you according to your request:

  • Transport in France and abroad
  • Unloading and setting up
  • The strata on site
  • Part piping, design, prefabrication and assembly on site
  • Testing
Back to top